Fastfire BronzeClay 30grs

Modeling clay, composed of metal particles, which after modeling if we bake it remains hard as metal, making it a fantastic material for making jewelry and easily customizing our pieces.

Unlike normal Bronzclay, the baking time is shortened and we can work a little faster.

We can bake the pieces in about 2 h or less.

We can make sculptures, jewelry and other objects.
The material is reduced by 17 to 20% after firing.

Instructions for use:

1) Open the vacuum pack and remove the piece of clay.

2) Condition the piece of clay with a little distilled water or another type of oil. We can condition our hands for this task.

3) Once the piece is finished, we must let it dry before baking it, we can put it on a radiator or some low-temperature heat emitter, we can also use a small dehydrator.

We must bake the bronzclay inside activated carbon, this will reduce the oxidation of the pieces. We can fire several pieces leaving a space between them with activated carbon. We do not recommend that parts touch the metal container directly. We can use a stainless steel container to put the active carbon and our bronzclay designs.

4) Baking times, for pieces of 3 mm or less thickness, we can set a cooking ramp up to 829ºC per hour and keep at that temperature for another hour. The total time will be about 2 hours or less.

For smaller pieces we can reduce the firing ramp to 815ºC and maintain it above 807ºC.

5) Once the piece is fired, it can be sanded, burnished, patinated or soldered with traditional materials for jewelers.